The ECM 630 is an electroporation system primarily used for bacteria and yeast transformation in cuvettes. High throughput (25- and 96-well) models available.
ECM 630 GENERATOR
The ECM 630 is an exponential decay wave electroporation generator providing a broad range of voltage and time constants for full flexibility in varying transfection applications. The ability to select the resistance and capacitance values, and adjust the range of voltages is the key to achieving the optimal time constants and field strengths needed for efficient transformation of prokaryote and eukaryote transfection. The ECM 630 can perform the widest range of electroporation applications among commercially available electroporation generators.
Flexibility is important, so BTX has designed a plug and play system for our ECM 630 system to transition between standard cuvettes and to 25/96-well plates using High Throughput Plate Handlers.
The ECM 630 is intended For Research Use Only. Not for use in diagnostic, pre-clinical, or clinical procedures.
FEATURES
- Utilizes the BTX Power Platform Technology design and novel digital user interface
- Precision Pulse Technology provides unparalleled power in controlling the time constant
- Delivers a maximum of 6,000 A in the Low Voltage Mode; the ECM 630 is the most powerful generator in its class
- Voltage range of 10 V to 500 V with 1 V resolution and 1 µF, 25 µF to 3,275 µF in 25 µF increments. 25 µF to 1,575 µF, 25 µF resolution with "None" setting
- Voltage range of 50 V to 2,500 V with 5 V resolution and either 25 µF or 50 µF, 25 µF to 3,275 µF with 25 µF resolution
- Resistance range of 25 ohm to 1,525 ohm with 25 ohm resolution. The additional resistor selection "None" allows researchers to reproduce protocols from competitive systems
- Hundreds of BTX Electroporation protocols may be duplicated with this instrument
APPLICATIONS
- Transformation of bacteria and yeast
- Transfection of mammalian cells
- Transfection of plant tissue and plant protoplasts
- High throughput 25- and 96-well electroporation
HIGH THROUGHPUT (HT) ELECTROPORATION
The High Throughput (HT) 96- and 25-well systems offer multi-well electroporation technology for processing multiple samples in seconds. Using the HT multi-well plates instead of traditional cuvettes, the researcher can transition from a single cuvette to either a 96-well or 25-well electroporation plate by using a plate handler. This increases yields and the number of experiment runs in a single day. Experiments take seconds to run, allowing for quick and efficient optimization of the electrical and biological parameters. Once optimized, samples are rapidly processed increasing yields and saving valuable time and money.
The key to the HT System is the combination of the ECM 630 Generator with the Plate Handler and multi-well plates. The Plate Handler holds the plates and delivers the pulse(s) to the wells using parameters set in the ECM 630 generator. The HT 100 Plate Handler provides manual track switching (45-0412, 45-0422).
MONITORING OPTION
Addition of the ENHANCER 3000 allows the researcher to monitor and track key electrical parameters used in electroporation applications. The electrical pulse data is captured as both a graphic display of the wave form and electrical output values following each experiment.
INCLUDED ITEMS
| Item # | Product | Included Items |
|---|---|---|
| 45-0001 | ECM 630 Electroporation System Complete, for Cuvettes (N. America) | ECM 630 Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each) and Cuvette Rack 660 |
| 45-0001INT | ECM 630 Electroporation System Complete, for Cuvettes | ECM 630 Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each) and Cuvette Rack 660 |
| 45-0051 | ECM 630 Generator Only (N. America) | ECM 630 Generator only |
| 45-0051INT | ECM 630 Generator Only | ECM 630 Generator only |
| 45-0412 | ECM 630 High Throughput Electroporation System, 25-well with HT-100 (N. America) | ECM 630 Generator, 25-Well Plates (2 mm gap, 6X), Plate Seals, HT-100 Plate Handler and a Plate Adaptor |
| 45-0412INT | ECM 630 High Throughput Electroporation System, 25-well with HT-100 | ECM 630 Generator, 25-Well Plates (2 mm gap, 6X), Plate Seals, HT-100 Plate Handler and a Plate Adaptor |
| 45-0422 | ECM 630 High Throughput Electroporation System, 96-well with HT-100 (N. America) | ECM 630 Generator, 96-Well Plates (2 mm gap, 2X), Plate Seals, HT-100 Plate Handler and a Plate Adaptor |
| 45-0422INT | ECM 630 High Throughput Electroporation System, 96-well with HT-100 | ECM 630 Generator, 96-Well Plates (2 mm gap, 2X), Plate Seals, HT-100 Plate Handler and a Plate Adaptor |
| 45-0071 | ECM 630 Electroporation System Complete, for Cuvettes with Monitoring (N. America) | ECM 630 Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each), Cuvette Rack 660 , ENHANCER 3000 Probe, ENHANCER Interface Box, Oscilloscope and Cables |
| 45-0071INT | ECM 630 Electroporation System Complete, for Cuvettes with Monitoring | ECM 630 Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each), Cuvette Rack 660 , ENHANCER 3000 Probe, ENHANCER Interface Box, Oscilloscope and Cables |
| 45-0471 | ECM 630 High Throughput Electroporation System with Monitoring (N. America) | ECM 630 Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each), Cuvette Rack 660 , ENHANCER 3000 Probe, ENHANCER Interface Box, Oscilloscope, Cables, 25-Well Plates (2 mm gap, 6X), HT-100 Plate Handler and a Plate Adaptor |
| 45-0471INT | ECM 630 High Throughput Electroporation System with Monitoring | ECM 630 Generator, 630B Safety Stand, Cuvettes 1 mm, 2 mm, 4 mm pkg. of 30 (10 each), Cuvette Rack 660 , ENHANCER 3000 Probe, ENHANCER Interface Box, Oscilloscope, Cables, 25-Well Plates (2 mm gap, 6X), HT-100 Plate Handler and a Plate Adaptor |